How To Flash Android Smart Phone Mobile Using SpFlash Tool

These Are The Instruction To Flash ROM Firmware Using Smart Mobile Phone Flash Tool (SpFlash Tool) On Windows Computer.

Requirements : Your Android Samrt Mobile Phone Should Have At-least 70-80 Percent Of Battery To Perform The Flashing Process.

How To Flash Stock ROM Using SpFlash Tool

Step 1. Download Mediatek (Mtk) Usb Driver And Install Mediatek (Mtk) Usb Driver On Your Computer.in Case Usb Driver Are Allready Installed On Your Computer Then Skip This Step.

Step 2. Power Off Your Mobile Phone And Remove The Battery (If It Is Removable).

Step 3. Download The ROM Firmware That You Want To Flash On Your Smart Mobile Phone And Extract On Your Computer.

Step 4. Download And Extract SpFlash Tool On Your Computer. After Extracting You Will Be Able To The Following File.

Step 5. Now Open Flash Tool.exe (You Will Find This From The Extracted Files In Folder).

Step 6. Once Smart Mobile Phone Flash Is Launched, Click On The Download Tab.

Step 7. In The Download Tab, Now Click On Scatter Loading Button.

Step 8. Now, Locate The Scatter File ( You Will Find The Scatter File In The ROM Firmware Folder).

Step 9. Click on Download / Upgrade Button In The Spflash Tool To Begin The Flashing.

Step 10. Now, Connect Your Mobile Phone To the Computer Using Usb Cable (Without Battery-if It Is Removable). After Connecting The Device To Computer, Press Volume Down or Volume Up Key, So That Your Computer Easily Detect Your Mobile Phone.

Step 11. Green Ring Will Appear At The End Of Flash Successful Done.

Step 12. Close The Smart Mobile Phone Flash Tool On Your Computer And Disconnect Mobile Phone From The Computer.

How To Use SpFlash Tool Video Tutorial